Concrete mixing - this is how experienced professionals go about it

If you want to pour your foundation for the garden house, the carport or the terrace roof yourself, you need concrete. In the tutorial you will read how experienced professionals mix their concrete and what tips should be considered.

List of required materials and tools

Before you mix the concrete, you should prepare the following tools:

Trowel

Mortar stirrer for mixing the concrete mixture

Shove

Bucket for smaller quantities of concrete

Wheelbarrow as an alternative to the bucket or for transport

Gloves

Safety goggles

Concrete mixer for larger quantities of concrete

For mixing concrete these materials are required:

Gravel

Cement

Water in sufficient quantity

Concrete mixing step by step

The professionals have all the tools and materials. They mix the concrete.

 Wear protective clothing

The mixing of concrete is not really dangerous, concrete splashes on clothing are still annoying and unnecessary. In addition, it should be avoided that substances get into the eyes and irritate them. Therefore the professionals put on appropriate protective clothing and put on safety goggles. They work with concrete, always wear gloves. The work clothes for the upper body should have long sleeves, in order to protect the arms sufficiently from splashes. Additional preparation is required to use a concrete mixer. Never reach into the device and place it on a level surface. Make sure that the concrete mixer is sufficiently stable. Now is also a good time to arrange the tools needed in the garden in the workplace. Follow us on: Twitter

Mix concrete in the bucket

When adding water to the cement, the motto is: less is more. Add small amounts of water and grope to the right consistency of concrete mass. Always make sure that the concrete does not get too liquid. The amount of water should be about half the amount of cement, so that there is a good mixing ratio. The mixing of the mass can be exhausting, but it is much easier with a special mortar stirrer.

Stir for four minutes until you get a mixture that is neither too solid nor too fluid. The consistency should be mushy. Once the concrete has been completely mixed, it goes straight to processing. Remember that the concrete cures immediately, so there should be no time gap between mixing and processing. That's why it makes perfect sense to mix the concrete wherever you want to use it. For example, if the concrete is to be mixed for the pouring of a foundation for the garden shed , do the work directly on the planned location of the garden shed on the lawn in the garden. Cement rendering Sydney is very much professional and does their job neatly.

Mix concrete in concrete mixer

The professionals need significantly more concrete for your foundation, there is no way around using a concrete mixer. Switch on the concrete mixer and add two-thirds of the planned amount of water. Then pour the gravel into the concrete mixer and the cement. If the concrete gets too hard, just add a little water, the professionals do these very neatly. Concrete with a good consistency shows a certain shine. After mixing in the concrete mixer, as well as for mixing cement in the bucket, you must immediately start concreting. The concrete begins to harden immediately. Cement rendering Parramatta is very famous for their work.